speed compared to stock.īesides replacing the ring and pinion, we also offer numerous other upgrades, such as ARB Air Lockers, manual locking hub conversions, rebuild kits, ball joints, and so much more. Or, you can also opt to go with a slightly lower ratio of 4.56 that would give you a higher RPM vs. Unfortunately, in this scenario there is no such thing as a 4.23 ratio, but the closest would be a 4.10 that is readily available. speed as with the factory tire size, you would want to install a 4.23 gear ratio (3.55/31*37). By using cross multiplication, we can determine that in order to have the same RPM vs. Lets give the example of upgrading to a 37" tire. speed are effected, even causing a disruption of the shift pattern on automatic transmission equipped trucks. ![]() But as soon as you upgrade to a 35" or larger tire, all of a sudden your RPM vs. As previously stated, most of these trucks came factory with a 3.55 ratio, designed to have a proper run out with a stock size tire (roughly 31" depending on model year). One of the best upgrades we can recommend for anyone that has increased tire size, is that of a ring and pinion ratio upgrade. For those of us that demand substantial power increases and larger tires, there is room for improvement to improve the reliability and performance that they can afford. ![]() Over the years, these assemblies have proven themselves relatively reliable on moderately used trucks running stock, or close to stock tire size and power output. From the factory, these housings were stuffed with either the popular 3.55 ratio, or the 4.10 most commonly used for heavy duty towing, as it delivers higher RPM's at lower speeds in comparison to the 3.55 ratio. The 70's were reserved for the automatic transmission, single rear wheel (SRW) applications, where the larger 80 was used in all duallies (DRW) or single rear wheel trucks with manual transmissions. Specifically regarding the Ram lineup, these trucks featured a Dana 60 assembly up front and either a Dana 70 or Dana 80 out back. Until the release of the 2003 Rams, Dodge had a long standing relationship with the acclaimed axle manufacturer, Dana, well known in the automotive industry for providing robust assemblies to support these heavy duty trucks, and numerous other applications.
0 Comments
Leave a Reply. |